After returning from the fiber retreat on Sunday, I dedicated most of my at home craft time to finish weaving the scarf that I warped last week. I had spun a beautiful skein of fingering weight Romeldale CVM roving that I had purchased from my friend and local shepherd at Sunrise Valley Farm, Gail Groot. It was soft and even, but not enough to do an entire scarf. An online friend, Ellen Sakornbut, of Fiber Curios on Etsy has some lovely fingering weight mill spun yarn of 60% Shetland Lamb and 40% baby Alpaca that coordinated beautifully with the CVM.
After the above photo was taken, I repaired the lead row, I had failed to shift the shed after inserting the spacer, so I pulled that one and pushed the next one up firmly. The loom was warped with both yarns and the weft weave alternated the two yarns in 8″ long blocks.
Tonight I cut it from the loom, it is 5’8″ long plus 4″ fringe on each end. It is slightly more than 7″ wide.
After the fringe was twisted, this photo was taken before it was soaked and laid out to block and dry overnight.
It is soft with the beautiful yarns. I hope it finds a home with someone who will love it and enjoy it.
For Christmas, my love gave me a 16″ rigid heddle loom (in pieces). Christmas afternoon, I got it well waxed, assembled, and warped with some yarn on hand. Using the instruction booklet that came with it, I wove the samplet shawl/scarf pattern trying out various techniques. Christmas also brought the announcement that another grandson was due imminently, so I quickly rewarped the loom with cotton to weave a baby blanket and erred in tracking the panel length, so the second panel didn’t have enough warp left to make it the same length as the first. All of that was cut off the loom, ends secured, and the loom rewarped again to make the second panel. The blanket was shipped off to arrive as it turned out on the day the young man came home.
I had some Romeldale CVM that I wanted to weave, but not enough to warp and weft a scarf, but an online friend had some Shetland lamb, Baby Alpaca mill spun in a color that complemented the CVM and so I ordered 400 yards from her. It has been sitting in a bag waiting for me to warp and weave. I really like to weave, but am not a fan of warping the loom. I learned direct warping and that is what the booklet teaches and I don’t have a warping board. Direct warping requires a lot of walking back and forth from the loom to the warping peg. This yarn is fingering weight, so a finer heddle was required which means more warp threads per inch. Finally today, since I don’t want to put anything on my wheel before next weekend’s retreat, I wound the yarn into balls and warped for an 8″ wide, 6′ long scarf.
The warp uses both yarns and the remaining yarn was weighed so the shuttle has enough for each section of the pattern planned. The loom won’t travel with me, but I’m in no hurry to finish this project.
At least I quit procrastinating and got the loom warped.
Today is a glorious break in a gray and wet week. We have had snow flurries, freezing rain, and drizzle this past week and two weeks of similar weather in the forecast. It has been calm wind wise until today, with warmer temperatures and sunshine. With the calm we had a fire scare earlier in the week when the farmer not immediately behind us, an area that is still wooded, but just beyond him in an area that has been logged, graded, and planted for pasture lit off first one, then several more large burn piles creating billowing smoke that looked too close to us that we feared was our nearer neighbor’s woods. We contacted him and after sending him photos, he left work to come check and let us know where the fires were and that they were being monitored with a track hoe.
There has been smoke down there for 6 days now from various piles, but at least we know the woods below us aren’t on fire.
Through the gray, drizzle and three waiting rooms days, I have been stitching through several smaller skeins of hand spun yarn that I had, making a hat and three pair of fingerless mitts, and finishing the Tool Box cowl from the mini skeins.
Can you tell I’m a lefty, always wearing the mitt on my right hand to take the photo? The Merlot colored mitts still need to be washed and blocked, they were finished last night. After trying on the cowl that I had made for me, I decided I’m not a cowl person, so I put a price tag on it and put it in the shop with the other items.
While perusing patterns, I found a cute hat with an owl on the front. Since there isn’t much yarn left that isn’t designated for weaving, I returned to spinning some gray/brown Coopworth last night. It would be a perfect color for the hat, but the pattern will require me to do some math as it calls for Aran weight yarn, this is likely to be DK weight when plied.
Since I’m not a Super Bowl watcher, I only know one team that is playing and have no allegiance to them, I think I will warp the loom and start a cowl or scarf with a pattern instead of plain weave and continue spinning the Coopworth so I have a pocket project to work on during waiting room visits this week. Since we try to group our errands and lunch out around hubby’s PT visits, I have a 30-45 minute waiting room session a couple times a week, so I need a new pocket project.
Generally, when I spin and knit, I don’t track my time very carefully, if at all. I know it takes me about an hour to spin an ounce of fingering weight yarn on my wheel. An ounce on drop spindles is much longer.
I am not a speed knitter, but not a slouch either and the size of the yarn and needles affect how much I can get done in an hour.
These factors always stop me cold when I am pricing an item of hand spun, hand knit for my shop. A hat of worsted weight yarn might take me about 4 hours to knit if it is a simple pattern, like this one, a slouch hat of stockinette, garter, and ribbing. The yarn was worsted to aran, about 3 ounces, so a couple of hours of spinning and plying. A total of 6 or 7 hours of my time plus the cost of the wool to spin.
This cowl took me close to 24 hours to knit. The three skeins that were hand spun in the cowl were done on drop spindles. The fiber and the mill spun mini skeins were all gifts or bonuses that came with other purchases, so it was just time involved.
Total hours on this fingering weight cowl, maybe 35. I doubt that this cowl will go in the shop, but there is one in the shop of silk, drop spindle spun, my own pattern design. Paying myself slave labor wages of a couple of dollars an hour, it would have to be priced at more than $70-75. People will look, comment that it is lovely, that they can’t spend that much money on a gift or on themselves, and walk on, at least in the area that we live.
The shawl in the header photo is the one I did from the Shave ‘Em to Save ‘Em challenge yarns. It has 8 different breeds hand spun on the wheel. Each breed had to be at least 4 ounces, but the white center triangle was 15 ounces and the light gray around the edge and one stripe was 8 ounces. That was countless hours of spinning and then probably near 50-60 hours to knit it. It isn’t for sale, it couldn’t be. How could I ever price it?
This is my conundrum. My hook is that my items are hand spun, hand knit, or hand woven garments, so I don’t want to work with inexpensive big box store yarn. My body products are handmade with organic ingredients. Because the body products are generally priced under $10, they sell at craft shows and holiday markets but spinning, knitting, and weaving are what I do for pleasure.
So how do you decide what you are worth? Or how much loss you are willing to take to continue the crafts? And none of this takes into account what the equipment costs are to do these crafts.
A few days ago, I asked, “Where is Winter?” Well it found us. When we left for grandson’s birthday dinner last night, there were snow flurries. This morning, there was a dusting on all surfaces and a morning temperature of 16f. The high staying in the 20s. Now, I know that isn’t cold in parts of the world, but it is pretty danged cold here. Tonight is a repeat, then we return to more normal 30s and low 40s daytime, 20s to low 30s nightime. I expected to get zero eggs today with it so cold, but the girls surprised me with 4. I have gone out several times today to check so they wouldn’t freeze in the nesting box. The water in the coop was frozen this morning and will be again tomorrow.
This would have been a good day to stay in, but we had yet another appointment to keep this morning and it required a driver for the passenger, so both of us were out in the bitter breeze.
Yesterday afternoon, I finished knitting the carry along hat I cast on a couple days ago. The pattern is Barley Hat by Tin Can Knits, the yarn is my hand spun Tunis dyed red, plied with a Jacob X Finn. I spun this skein as an early wheel project, so it has been sitting in my stash for quite a while and it has never sold. It was a good weight for a hat and enough to make a large slouchy version. It is damp and blocked in the photo.
Knowing there would be waiting room time today, a project that has been in my queue for some time is Tool Box Cowl by Adventure DuJour Designs to use up several collected mini skeins, some of which I spun on the drop spindle. After I finished the hat, I cast on for it and got the garter rib section done and realized that I didn’t have the right needle size for the rest. My interchangeables only go down to a size 3, I have a size 2 fixed circular needle, but it is 16″ long and the cowl has 168 stitches, so too many for such a short needle. While at daughter’s house for cake after the birthday dinner, I borrowed a 24″ and continued on with the Diamond Tweed pattern on the correct size needle. I have finished the first two colors of 6 and am about to work the next Diamond Tweed section that uses color 2 and 3. Color 3 is the blue and teal mini skein in the lower right of the photo.
Color 1 is hand spun Coopworth, Color 2 is a wool/bamboo/silk blend I spun on a drop spindle, Color 3 is a mill spun mini skein that was dyed by a friend that has passed away. Colors 4 and 5 are his yarns also, and Color 5 will be another drop spindle spun mini skein of Merino/Silk/Sari Silk. Each skein has some blue in it.
Yesterday we picked up Saturday’s mail and in it was the yarn I had ordered as the warp for a scarf or cowl. It is Shetland lamb and baby Alpaca that will be used with my spun Romeldale CVM.
The grayer brown is my hand spun. I had hoped that the book I had ordered with rigid heddle information and patterns would beat the yarn here, but the book is still not in. I would have had it sent to the house, but the book seller said it would come in in 2 or 3 days. The book seller I spoke with today said I should never have been told that, that it usually takes about a week and with their membership, which we have, it could have been shipped directly to me with no shipping charges and likely would have arrived sooner. Oh well! It will come in when it comes and I will plan out the use of the yarns above.
The hat will definitely go in my shop. The cowl is probably mine. The undecided cowl/scarf/small wrap with the yarn above will likely go in the shop, brown is not my color against my face. I guess my inventory is being rebuilt for the online shop and next fall and winter’s markets.
So far this is proving to be a mild winter, gray and drizzly. It suggests that stink bugs, ticks, and fleas will be prevalent this summer. It is so mild, that the weeds that are usually beat back in the vegetable garden in winter are not only growing, but thriving. Last summer, the garden was a lot of work and I tried to stay on top of the weeding, but was losing the battle with some of them. I never beat the mint bed and the Creeping Charlie is taking over and choking out everything. The garden is also too big for me to keep it all in rotation. I have looked at options for reducing the size, making some of the boxes 4 boards high instead of 2, but the perennials are at the two ends with a 4 X 8 bed of blueberry bushes that finally produced last summer, the 3 barrels that are old and fragile of red raspberries and I fear they would disintegrate if I try to move them and they finally have the raspberries contained at one end. The other end has the asparagus bed that is now 6 or 7 years old and produces more asparagus than daughter, a friend, and I can eat in a season. Those two perennial ends do control the garden size to some extent.
One side of the garden is a pathway away from the chicken pen for about half of the garden length, beyond the chicken pen is one of the worst patches of Creeping Charlie. I have considered pulling down all of the fencing and starting over. If the fencing was hard up against the boxes on the side that the chickens can reach, the length of the garden and if I keep the plantings far enough away from the fence to prevent long necks from reaching through to eat my veggies, perhaps their scratching would keep the weeds down on that side of the garden. The chickens won’t touch the Creeping Charlie to eat, but maybe their scratching for seeds and goodies tossed down there would reduce it. The sides of the garden nearer the house and south of the berries could be reduced and the boards from those boxes used to make the rear boxes taller so they are easier for me to work. The issue there is the post that has the solar charger on it is on that edge, though the charger is dead. Maybe it could be moved with the fence or just be removed entirely. If moved, I could hang a gate on it.
In April, the university has a service day that you can sign up for help. Maybe some help getting the fencing in order for the garden and chicken pen would be incentive to keep at it.
Today’s forecast looks like maybe the thunderstorms from a few days ago are going to be followed as the adage says with some snow to start the weekend. More likely it will be a sloppy mix of snow, freezing rain, and rain with little or no accumulation.
The hens must think it is spring. This week I have had a day with 3 eggs, one with 4, and yesterday I got 5. There probably won’t be any today, but that is okay. This is the first winter I have gotten any from my hens.
The warm weather has had me reluctant to use one of my Christmas gifts, a cast iron bread pan, but this bread is an easy loaf that can be made in just a couple of hours with no kneading, so we had a hot loaf of Herb and Onion bread for dinner one evening.
The drizzle outside, the doctor’s appointments, and now a pair of head colds between us have keep me indoors and instead of warping the loom, I finished spinning 4 ounces of Romeldale CVM that I got from my friend Gail (Sunrise Valley Farm) and got a generous 289.5 yards of light fingering yarn from it. It is now washed and awaiting the arrival of a purchase of mill spun alpaca, silk, wool blend yarn from another friend. The mill spun will be the warp for a scarf or wrap and the CVM the weft. I also spun 3 ounces of Coopworth from another friend, Debbie (Hearts of the Meadow Farm) and got 112.5 yards of worsted weight from it. I have ordered another 8 ounces of Coopworth that may be from the same lot, or will at least coordinate with it and it will become another scarf or wrap. I am going to try to spin some of it tight enough and fine enough to be the warp.
Today after a frustrating attempt to order a rigid heddle book online using a gift card, we went to Barnes and Noble and ordered it there. I hope to learn some new techniques and patterns to work into my weaving. With the 8 ounces of Coopworth to match the maroon above, I ordered another 8 ounces of this
It doesn’t really have a plan, but I have a 4.8 oz braid of BFL and Tussah Silk that might go well with it. I’ll have to wait to see how they spin before I decide.
The blanket beat the baby. The weave was completed last evening, but I didn’t want to work with my sewing machine without very good light, so it rested on the loom overnight with the small towel.
After the morning Farmers Market run for some protein and veggies, which we did between the early morning rain and the arrival of the cold front with wind and more rain, the weave was carefully removed from the loom. The third panel was added to the other two, the ends hemmed. The other three pieces were also hemmed.
The crochet hook located and a single crochet edge applied.
With fingers crossed that there wouldn’t be too much shrinkage, the four pieces were put in a cool water quick wash in the washing machine and a dry on low in the dryer. The blanket shrank a bit as expected, but is still baby blanket size. I think the Lily Sugar and Cream shrank too much for the towel to still be a towel and the smaller one is a dish drying mat or hot pad size. The dish cloth is ok.
Maybe 3 more woven with the same warp amount and the three blocks, I will have a set of placemats. If packaged with the hot mat and 4 napkins sewn from a matching color cotton fabric, it will make a nice set to gift or sell.
As tomorrow is Olde Christmas at Wilderness Road Regional Museum, the rest of the evening is being spent making sure that I have clean fleece to spin, fiber on the ring distaff for spindle spinning, and a basic men’s hat cast on with hand spun Jacob on the bone DPNs. That will give me plenty to demonstrate to any visitors that tour through the museum. The militia will be outdoors and will fire off a salute to Christmas. There will be goodies to eat, craft beer to buy, some crafted gifts to purchase, and music. It is a family friendly event, so if you are a local reader, it should be a nice if cool day to come out for some fun.
I am a relatively new weaver. Having used a rigid heddle loom briefly a couple of years ago, one that I had help warping. Getting a 5′ Tri loom in 2018 and weaving a few shawls and wraps on it. Borrowing a small rigid heddle loom for a 4th grade demonstration event on spinning, weaving, and colonial clothing in early December, I wove off the small amount of warp on it, warped it myself, used it and wove off the remainder of the warp after the event. For Christmas, I was given a 16″ rigid heddle loom and the announcement of another expected grandchild.
Christmas night, after waxing and assembling it, I warped that loom following my memory with guidance from the booklet that came with it and wove the sampler wrap pattern in that booklet. I felt like I had the confidence to tackle a cotton woven baby blanket. I had only woven wool, wool/acrylic blend up to that point. The cotton was purchased after Christmas and again I warped the loom, using white warp. The weft that was purchased was variegated and about 6 inches into the weave, I realized that the variegated yarn wasn’t strong enough color and the blanket would have looked washed out. Back out the next day to pick up a dark solid from the colors in the variegate and a plan to make the blanket color blocked. As the panels from the 16 inch loom aren’t wide enough alone, the plan and warp was to make 3 panels to be sewn together, hemmed and a crochet edge applied. The weaving was progressing much more quickly than I thought it would and I was marking every 6 inches, checking off my sketch. I was on the last panel and put it aside to go to the New Year’s Eve party at Mountain Lake. Yesterday, I pulled the loom table over to finish the weaving and realized I had a fair amount of warp left. Not wanting to waste it, I put a spacer in and wove a 12 X 12″ wash cloth. Carefully cut everything off the loom and carried it in to the sewing machine to secure the ends before I cut the panels apart, layed it out on the ironing board to cut it and DRAT, I made one panel one color block too short, that is 9 inches. I was disappointed that I had made such an error, but the 12 by 24″ panel will make a small towel to go with the wash cloth. But that meant the loom had to be warped again to weave the final panel.
Since I had to go through the steps again (I’m getting quicker at it and more efficient), I warped enough to make a second towel while I’m at it.
Lessons learned: 1) I don’t like weaving cotton very much; 2) make sure your pattern is accurate and pay more attention to it; 3) practice improves.
Since the loom was requested to take some of the burden off my joints from knitting, to add some different styles of garments and accessories to my shop, and to make some gifts, I guess the extra weaving gives me a head start. I need to get lining fabric and rope or twill to make bags/purses out of some of the earlier wool weaving and finish this blanket, SOON!
The Christmas loom was warped and woven using the sample pattern in the booklet that came with the loom. I didn’t care for two of the 8 pattern techniques, so I only used 6 of them. The booklet didn’t tell you what the end length would be and I am not experienced enough to realize that the amount of warp was insufficient to make a decent length scarf for the width. I am not concerned about that as it is just the right amount to make two purses. I will buy the lining fabric and twill tape to make the strap and hope that they will be a nice addition to the shop.
This is it folded in half and drying after it’s bath. I think the fringe will need to be shortened about half or two thirds to make it look right. My idea will have a slip pocket in the back of the lining and woven tape down the sides and under the bottom for extra support and then woven tape to create the strap.
Christmas brought us some news that has the loom already rewarped with cotton. The warp is white, the weft is variegated, but I don’t think it has enough color, so tomorrow a trip back to Joanne’s will be made to try to match one of the colors in the variegated yarn to add stripes of color.
This is a 135″ weave. When cut in thirds and offset, it will make it color blocked. I think the solid color will be a textured weave of some sort. Until I get the remaining yarn, I will continue to knit some Romeldale CVM from Sunrise Valley Farm that I am knitting into fingerless mitts for me. I really would like to have them finished by next weekend when I will participate in Old Christmas and the burning of the greens at Wilderness Road Regional Museum. At that time, I will be donating my sitting quill wheel to the museum and when I am there spinning or teaching, I will use one of their wheels that I have repaired or this one that I am donating and will no longer have to haul one of my wheels to the venue.
My love added to my fiber toys this morning. Under the tree was an Ashford Samplet 16″ rigid heddle loom.
We began our morning with Huevos Rancheros, a dish I traditionally fix on Christmas and New Year’s mornings. It is a special treat for him, one he grew up with. It was just us this morning so no rush on opening gifts, he already had most of his with his new leather chair and his refurbished “new” computer, but there were a few minor surprises under the tree for him.
We took gifts to daughter’s house and had an exchange with them, then home and I upacked the loom box.
When our house was being built, I made several 5 gallon buckets of home-made paste floor wax. The instructions said to wax or seal the wood before assembly, so I opened on of the remaining buckets, scooped out a tin full of the wax and spent about an hour hand waxing the pieces. Then assembly commenced.
With my recent lesson, having warped my friend’s borrowed loom, and the very detailed instruction booklet, I successfully warped the loom with some of my hand spun dk weight yarn.
My stocking contained a Barnes and Noble gift card, so a book or two of projects and techniques will be added to my growing collection of craft and fiber history books, several had been added by eldest son’s family for my birthday and Christmas. The booklet with the loom has a sample scarf with instructions for several different weaving techniques to try in the meantime.
The Let it Snow box in the photo above was the gift from daughter and her family. Treats and a beautiful cribbage game in a wooden box. I used to play it with my Dad and plan to refresh my skills and teach her and her kids.
Youngest son and his family sent us a pair o mugs with all of our grandchildren represented on them. Tonight I am enjoying my evening tea from mine.
As a Christmas bonus, the year old hens produced 3 eggs today. We have been getting 1 or 2, and I have never had hens lay in the winter before. Such a treat to still be getting farm fresh eggs to eat and cook with this time of year.
I think my favorite gift from hubby today is a tiny music box in my stocking.
It plays, “You Are My Sunshine.”
Here’s hoping you had Merry Christmas or Happy Hanukkah.
Cabin Crafted 