Yesterday when my friend was using my Kromski Prelude, I noticed the wheel was wobbling a bit and as I watched, I realized that the drive wheel supports were both a tad loose. I have two Allen wrench sets in my tool box, one metric, one American standard. Since the Kromski is Polish made, I brought in the metric set, which is missing the 3 mm size. I feared that the Allen head screws were 3 mm, but got lucky, they were 4 mm. Now the set is missing two sizes because I put the 4 mm one in my wheel repair kit. Hopefully if I need it elsewhere, I will remember where it is. The design of the wheel makes it very difficult to get to those two screws and I feared I was going to have to remove two legs to tighten them. That would have been a hassle as the treadle and its connected footman are attached to one of the legs. With some difficulty and the short end of the Allen wrench, I managed to get them tight and the wobble is gone.
As I was so enamored with my new spindle, I continued working with it last night until the entire fiber sample was spun. Then I hand wound it off the spindle into a tiny center pull ball and plyed it on itself. It was such a tiny amount, that it produced only 24 yards of light fingering weight yarn.
With the 73 yards spun on the Jenkins Turk recently, if I can find a good coordinating fiber to spin, I will use those two as garter ridges in a hat.
Tonight, I am spinning on the wheel, some Coopworth and Alpaca roving, and on the new spindle, I have some silver Shetland. I want to finish the fiber on the wheel, there is very little left, but the bobbin is getting full, so I may be playing chicken with the bobbin. When I leave for my fiber retreat weekend next Thursday, I want to leave with empty bobbins and some fun fibers to spin. I have one colorful BFL braid, two others at least 4 ounces and a 2 ounce due in the mail, hopefully to arrive before I leave.
I also need to make some lip balm that has been requested by friends prior to my leaving. Hopefully, the bobbins will be emptied, the lip balm made and I will concentrate on knitting the Close to You mini shawl and the strandwork hat both on the needles and spin on the spindles until I leave.
Our weekend started with a luxury dinner out for our Valentine Anniversary. There are few nice restaurants in our nearest big town. There are more in the nearest city, about an hour away, but this was the first February 14 that we have spent at home that it hasn’t snowed, so we don’t make reservations that far from home. Last year, we went to the same restaurant and having been there several times before we expected a good dinner and left very disappointed. They post their menu a few weeks prior and we gave them another chance. The starter, salad, and dessert are set, but they had a choice of three entrees, beef, salmon, and pasta, each well presented. Hubby got the beef, I got the pasta and we were both pleased.
Yesterday was a quiet day, not much accomplished but some knitting and spinning, some laundry. The coop needed cleaning as did the house. There was no straw or woodchips to use in the coop, we needed dog food, chicken food, and bird seed but didn’t want to go out yesterday.
After a lunch out today, a trip to Tractor Supply took care of all those needs and the coop was cleaned, sprayed down inside and refilled with fresh pine chips. Tractor Supply had 6 pounds of Black Oil Sunflower seed for $7, but 40 pounds for $10. Not sure how I would deal with 40 pounds, the bargain was too great. Every extra bucket is filled, along with the bird seed container and the bag still is about 1/3 full. The house was vacuumed, dusted, and the kitchen cleaned. Between jobs and preparing dinner, the fiber that was being spun on the spindle was finished and a few rows knit on the scarf.
Left is the fat little cop of singles, Merino, bamboo, and silk from Inglenook Fibers; Close to You being knit from Lollipop Yarn, and the fat little cop of the plied yarn. Looks like I’m stuck in a color warp.
The warm winter and lengthening days have upped egg production from 1 to 3 a day, now getting 4 to 6 a day and the yolks are taking on a nice healthy golden orange. This is the first winter wince I’ve been raising hens that there have been any winter eggs.
Most Saturday’s are started with breakfast out, followed by the Farmer’s Market. Yesterday, we debated whether that would be a good idea as it snowed lightly all day, mostly horizontally as the wind howled, then enough after the sun went down to wreck havoc on some of our local roadways as they weren’t expecting it and the roads weren’t pretreated. When we got up this morning, there was barely a dusting in the grass and on the cars, the gravel drive was clear and we headed out. Any snowfall that slickened the steep roads last night was gone and it looked like the salt truck had been through even on our mountain road. After a fresh bagel at our local shop, a brisk stop at the Farmer’s Market for some weekly goodies we headed home. Just in time to meet up with our local blacksmith friend who has done some work for us lately.
I have previously described our Rumford style fireplace. It has a floor vent size hole that goes from the front of the firebox to the outdoors. We immediately put hardware cloth at the outer opening to prevent it from becoming a mouse freeway, but the air still had free movement. For all the years we have lived here, a piece of 1 x 6 board has sat on that opening when no fire was burning, and it has been replaced numerous times when someone tossed it in the fire as kindling. There is also another rectangular hole, not quite as large that had a hinged flap so that ashes could be scooped down it, but that made an awful mess when they fell a whole floor down and didn’t hit the bucket at the bottom. More than a decade ago, at a local craft fair, we bought a 3 piece hand forged fireplace tool set that lacked tongs.
This is where our local blacksmith friend enters the picture. First, he made us a metal cover for the floor vent sized hole and put a handle on it to make it easy to remove from the vent when we are going to light a fire. Last time we had the chimney cleaned, the sweep glued the door on the ash dump shut, but the fireplace heat broke it free again and so Josh welded it shut for us. About a week or so ago, we had a fire going and a log rolled over the vent hole which allowed smoke to start entering the living room and I wrestled with the log with a poker and the ash shovel, prompting a message to Josh about making us some tongs. He met us with us today because he finished them.
He made the tongs to match the older tools. And he makes both hammer in and screw in hooks, hanging hooks, shawl and hair pins, and other metal work as well as teaching blacksmithing locally. If you need anything, you can seek him out on his Facebook page JJL Forge.
Most of the morning chores are done and I am working on spinning the alpaca/merino and Cormo rolags I blended yesterday morning on my blending board. I have about 2/3 of them spun so far. I didn’t weigh it first, but I think it was close to 4 ounces of fiber.
I don’t know what it will become, but whatever it is will be soft.
Today is a glorious break in a gray and wet week. We have had snow flurries, freezing rain, and drizzle this past week and two weeks of similar weather in the forecast. It has been calm wind wise until today, with warmer temperatures and sunshine. With the calm we had a fire scare earlier in the week when the farmer not immediately behind us, an area that is still wooded, but just beyond him in an area that has been logged, graded, and planted for pasture lit off first one, then several more large burn piles creating billowing smoke that looked too close to us that we feared was our nearer neighbor’s woods. We contacted him and after sending him photos, he left work to come check and let us know where the fires were and that they were being monitored with a track hoe.
There has been smoke down there for 6 days now from various piles, but at least we know the woods below us aren’t on fire.
Through the gray, drizzle and three waiting rooms days, I have been stitching through several smaller skeins of hand spun yarn that I had, making a hat and three pair of fingerless mitts, and finishing the Tool Box cowl from the mini skeins.
Can you tell I’m a lefty, always wearing the mitt on my right hand to take the photo? The Merlot colored mitts still need to be washed and blocked, they were finished last night. After trying on the cowl that I had made for me, I decided I’m not a cowl person, so I put a price tag on it and put it in the shop with the other items.
While perusing patterns, I found a cute hat with an owl on the front. Since there isn’t much yarn left that isn’t designated for weaving, I returned to spinning some gray/brown Coopworth last night. It would be a perfect color for the hat, but the pattern will require me to do some math as it calls for Aran weight yarn, this is likely to be DK weight when plied.
Since I’m not a Super Bowl watcher, I only know one team that is playing and have no allegiance to them, I think I will warp the loom and start a cowl or scarf with a pattern instead of plain weave and continue spinning the Coopworth so I have a pocket project to work on during waiting room visits this week. Since we try to group our errands and lunch out around hubby’s PT visits, I have a 30-45 minute waiting room session a couple times a week, so I need a new pocket project.
Generally, when I spin and knit, I don’t track my time very carefully, if at all. I know it takes me about an hour to spin an ounce of fingering weight yarn on my wheel. An ounce on drop spindles is much longer.
I am not a speed knitter, but not a slouch either and the size of the yarn and needles affect how much I can get done in an hour.
These factors always stop me cold when I am pricing an item of hand spun, hand knit for my shop. A hat of worsted weight yarn might take me about 4 hours to knit if it is a simple pattern, like this one, a slouch hat of stockinette, garter, and ribbing. The yarn was worsted to aran, about 3 ounces, so a couple of hours of spinning and plying. A total of 6 or 7 hours of my time plus the cost of the wool to spin.
This cowl took me close to 24 hours to knit. The three skeins that were hand spun in the cowl were done on drop spindles. The fiber and the mill spun mini skeins were all gifts or bonuses that came with other purchases, so it was just time involved.
Total hours on this fingering weight cowl, maybe 35. I doubt that this cowl will go in the shop, but there is one in the shop of silk, drop spindle spun, my own pattern design. Paying myself slave labor wages of a couple of dollars an hour, it would have to be priced at more than $70-75. People will look, comment that it is lovely, that they can’t spend that much money on a gift or on themselves, and walk on, at least in the area that we live.
The shawl in the header photo is the one I did from the Shave ‘Em to Save ‘Em challenge yarns. It has 8 different breeds hand spun on the wheel. Each breed had to be at least 4 ounces, but the white center triangle was 15 ounces and the light gray around the edge and one stripe was 8 ounces. That was countless hours of spinning and then probably near 50-60 hours to knit it. It isn’t for sale, it couldn’t be. How could I ever price it?
This is my conundrum. My hook is that my items are hand spun, hand knit, or hand woven garments, so I don’t want to work with inexpensive big box store yarn. My body products are handmade with organic ingredients. Because the body products are generally priced under $10, they sell at craft shows and holiday markets but spinning, knitting, and weaving are what I do for pleasure.
So how do you decide what you are worth? Or how much loss you are willing to take to continue the crafts? And none of this takes into account what the equipment costs are to do these crafts.
A few days ago, I asked, “Where is Winter?” Well it found us. When we left for grandson’s birthday dinner last night, there were snow flurries. This morning, there was a dusting on all surfaces and a morning temperature of 16f. The high staying in the 20s. Now, I know that isn’t cold in parts of the world, but it is pretty danged cold here. Tonight is a repeat, then we return to more normal 30s and low 40s daytime, 20s to low 30s nightime. I expected to get zero eggs today with it so cold, but the girls surprised me with 4. I have gone out several times today to check so they wouldn’t freeze in the nesting box. The water in the coop was frozen this morning and will be again tomorrow.
This would have been a good day to stay in, but we had yet another appointment to keep this morning and it required a driver for the passenger, so both of us were out in the bitter breeze.
Yesterday afternoon, I finished knitting the carry along hat I cast on a couple days ago. The pattern is Barley Hat by Tin Can Knits, the yarn is my hand spun Tunis dyed red, plied with a Jacob X Finn. I spun this skein as an early wheel project, so it has been sitting in my stash for quite a while and it has never sold. It was a good weight for a hat and enough to make a large slouchy version. It is damp and blocked in the photo.
Knowing there would be waiting room time today, a project that has been in my queue for some time is Tool Box Cowl by Adventure DuJour Designs to use up several collected mini skeins, some of which I spun on the drop spindle. After I finished the hat, I cast on for it and got the garter rib section done and realized that I didn’t have the right needle size for the rest. My interchangeables only go down to a size 3, I have a size 2 fixed circular needle, but it is 16″ long and the cowl has 168 stitches, so too many for such a short needle. While at daughter’s house for cake after the birthday dinner, I borrowed a 24″ and continued on with the Diamond Tweed pattern on the correct size needle. I have finished the first two colors of 6 and am about to work the next Diamond Tweed section that uses color 2 and 3. Color 3 is the blue and teal mini skein in the lower right of the photo.
Color 1 is hand spun Coopworth, Color 2 is a wool/bamboo/silk blend I spun on a drop spindle, Color 3 is a mill spun mini skein that was dyed by a friend that has passed away. Colors 4 and 5 are his yarns also, and Color 5 will be another drop spindle spun mini skein of Merino/Silk/Sari Silk. Each skein has some blue in it.
Yesterday we picked up Saturday’s mail and in it was the yarn I had ordered as the warp for a scarf or cowl. It is Shetland lamb and baby Alpaca that will be used with my spun Romeldale CVM.
The grayer brown is my hand spun. I had hoped that the book I had ordered with rigid heddle information and patterns would beat the yarn here, but the book is still not in. I would have had it sent to the house, but the book seller said it would come in in 2 or 3 days. The book seller I spoke with today said I should never have been told that, that it usually takes about a week and with their membership, which we have, it could have been shipped directly to me with no shipping charges and likely would have arrived sooner. Oh well! It will come in when it comes and I will plan out the use of the yarns above.
The hat will definitely go in my shop. The cowl is probably mine. The undecided cowl/scarf/small wrap with the yarn above will likely go in the shop, brown is not my color against my face. I guess my inventory is being rebuilt for the online shop and next fall and winter’s markets.
After the holiday markets and many months of knitting up my hand spun yarn, my yarn stock was low. When spinning in Colonial costume, I generally spin washed Jacob fleece, spinning from locks, combing or carding it to spin, but not using processed batts, top, or roving. I took advantage of lower stock and less stress to get things made to clean up my fiber area, see post https://cabincrafted.fangorn.space/?p=415 , but didn’t return to spinning then as I had been given a rigid heddle loom for Christmas and the announcement of the imminent birth of our 8th grandchild. I immediately bought cotton yarn and wove a baby blanket for him as I knew I couldn’t get a blanket knit fast enough. He was born on January 5th, the same day I mailed the blanket and it arrived the day he came home.
I had begun knitting fingerless mitts for myself as every pair I knit ended up being sold except one pair that were too small for me. Hats and fingerless mitts make good carry along projects and I worked on them in waiting rooms whilst hubby was having some medical imaging testing done on several days. They were finished, but wanting them to be long enough to be warm, I had made them too long to be functional, so I set them aside for a few days and returned to my spinning. I had bought 4 ounces of Romeldale CVM roving from a friend, a second 4 ounces, the first having been turned into yarn for the mitts that didn’t fit and the too long ones, and I returned to finish spinning it. While that skein was being washed, I looked to see what else I had besides the Jacob. In my stash of fiber was some roving that I could identify as Coopworth from another friend and spun it. With woven cowls and scarves in mind.
Two days ago, I ripped back the mitts to a more appropriate length, picked up the stitches and knit on new ribbing to make them useful, just in time for this weekend’s winter weather advisory. Then needing a carry with me project, I pulled a skein of yarn that I spun several years ago that has never sold and started a hat.
And I went to my newly organized stash to pull out more fiber to spin. This is where the disorganized part comes in. The fiber is all neatly bagged in bins, but I failed to put any identifying information in the bags, so other than a braid I got at the spinner’s Christmas party and the Jacob that I washed and bagged, I have almost no idea what I have.
There is still a little of the merino that a friend and I sent for processing, and a small ball of Cormo that was gifted to me, but there are bags that I can’t identify.
I am spinning the gray brown and I think, maybe, it is Coopworth from a friend. The creamy gray is a mystery. It feels like it might have alpaca in it, but I have no idea when I purchased it or from where. I don’t think I will dig deeper into the bins until I finish these two, knowing that there is a pound of fiber on it’s way to me in the mail. I think I will label them. I guess that is a good idea, my memory just isn’t serving me well today.
So far this is proving to be a mild winter, gray and drizzly. It suggests that stink bugs, ticks, and fleas will be prevalent this summer. It is so mild, that the weeds that are usually beat back in the vegetable garden in winter are not only growing, but thriving. Last summer, the garden was a lot of work and I tried to stay on top of the weeding, but was losing the battle with some of them. I never beat the mint bed and the Creeping Charlie is taking over and choking out everything. The garden is also too big for me to keep it all in rotation. I have looked at options for reducing the size, making some of the boxes 4 boards high instead of 2, but the perennials are at the two ends with a 4 X 8 bed of blueberry bushes that finally produced last summer, the 3 barrels that are old and fragile of red raspberries and I fear they would disintegrate if I try to move them and they finally have the raspberries contained at one end. The other end has the asparagus bed that is now 6 or 7 years old and produces more asparagus than daughter, a friend, and I can eat in a season. Those two perennial ends do control the garden size to some extent.
One side of the garden is a pathway away from the chicken pen for about half of the garden length, beyond the chicken pen is one of the worst patches of Creeping Charlie. I have considered pulling down all of the fencing and starting over. If the fencing was hard up against the boxes on the side that the chickens can reach, the length of the garden and if I keep the plantings far enough away from the fence to prevent long necks from reaching through to eat my veggies, perhaps their scratching would keep the weeds down on that side of the garden. The chickens won’t touch the Creeping Charlie to eat, but maybe their scratching for seeds and goodies tossed down there would reduce it. The sides of the garden nearer the house and south of the berries could be reduced and the boards from those boxes used to make the rear boxes taller so they are easier for me to work. The issue there is the post that has the solar charger on it is on that edge, though the charger is dead. Maybe it could be moved with the fence or just be removed entirely. If moved, I could hang a gate on it.
In April, the university has a service day that you can sign up for help. Maybe some help getting the fencing in order for the garden and chicken pen would be incentive to keep at it.
Today’s forecast looks like maybe the thunderstorms from a few days ago are going to be followed as the adage says with some snow to start the weekend. More likely it will be a sloppy mix of snow, freezing rain, and rain with little or no accumulation.
The hens must think it is spring. This week I have had a day with 3 eggs, one with 4, and yesterday I got 5. There probably won’t be any today, but that is okay. This is the first winter I have gotten any from my hens.
The warm weather has had me reluctant to use one of my Christmas gifts, a cast iron bread pan, but this bread is an easy loaf that can be made in just a couple of hours with no kneading, so we had a hot loaf of Herb and Onion bread for dinner one evening.
The drizzle outside, the doctor’s appointments, and now a pair of head colds between us have keep me indoors and instead of warping the loom, I finished spinning 4 ounces of Romeldale CVM that I got from my friend Gail (Sunrise Valley Farm) and got a generous 289.5 yards of light fingering yarn from it. It is now washed and awaiting the arrival of a purchase of mill spun alpaca, silk, wool blend yarn from another friend. The mill spun will be the warp for a scarf or wrap and the CVM the weft. I also spun 3 ounces of Coopworth from another friend, Debbie (Hearts of the Meadow Farm) and got 112.5 yards of worsted weight from it. I have ordered another 8 ounces of Coopworth that may be from the same lot, or will at least coordinate with it and it will become another scarf or wrap. I am going to try to spin some of it tight enough and fine enough to be the warp.
Today after a frustrating attempt to order a rigid heddle book online using a gift card, we went to Barnes and Noble and ordered it there. I hope to learn some new techniques and patterns to work into my weaving. With the 8 ounces of Coopworth to match the maroon above, I ordered another 8 ounces of this
It doesn’t really have a plan, but I have a 4.8 oz braid of BFL and Tussah Silk that might go well with it. I’ll have to wait to see how they spin before I decide.
Wilderness Road Regional Museum celebrated Olde Christmas today with the traditional King’s cake and the burning of the greens. There was story time at one end of the museum and my weaver friend, Kim and I at the other end. There were cookies, hot tea, and craft beer available. A roving fiddler to provide music. A Colonial toy set up by another friend, Mary.
The local militia gathered and fired off a multi gun salute.
We wove and spun for about 4 hours for visitors, discussing fiber in the Colonial era, visited with each other and guests.
I said goodbye to the wheel in my photo as it was donated today to the museum, reducing my herd to two, my huge Walking wheel and my everyday “in the style of” wheel. When I spin there, it will be one of my options for use.
Next time, someone else will take my picture, selfies don’t seem to work so well.
Each time I have a vending opportunity and sell little or nothing, I have second thoughts about the whole process. Is it worth it to load it all up, set it all up, sit there for hours, only to pack it up with maybe a few dollars in my pocket? Then the notices start arriving about opportunities that I haven’t tried before, hubby suggests new shapes or scents for soaps, I try a new product for myself and think it will sell and start downloading the applications.
Last night I ordered some “holiday” shaped molds and a flower shaped mold for cold process soap. Last spring, I added a sheep, a goat, and a couple traditional shapes. I rarely make the loaf shape that has to be sliced anymore. I played with a gorgeous swirl, but it didn’t set up properly and had to be re batched which caused the swirl to be incorporated. Then last night, shortly after I completed applications for two events I have never done before, a friend and I chatted and she may have yet another we can do together, both demonstrating fiber prep and spinning as well as vending our wares. The Holiday Markets at the Blacksburg Farmers’ Market, that I have done those for several years and had mixed results will conflict with one of the others, but I can still possibly do two of them. If they all pan out, that will be 5 events in a couple of months and will hopefully reduce my stock so I can reassess what sells and what doesn’t. Oddly, the two soaps that are preferred by my eldest’s family and by me are two that don’t sell at events very well.
I started out with mostly body care products and a few knit hats. As I have continued my adventure in spinning, more knits and weaves have been added, but the types of markets that I am doing generally don’t support the cost that a hand spun, hand knit or hand woven garment require. If I were to value my time invested in the process, the prices would be so high as to frighten off lookers. As a result, I generally try to recoup my fiber cost and some tiny amount for my design and time, but mostly consider it my entertainment expense. If a 4 ounces bag of wool costs $15-$25, pricing a hand spun, hand knit hat at $30 causes folks pause, but really doesn’t pay me for my time at all. It takes several hours to spin the fiber and several more to knit a hat out of medium weight yarn, my hand spun is often finer and so takes longer, so the pay for my time is $5-$15 total for 8-10 hours of work, not even sweatshop pay.
Maybe I’m going about this wrong. I started making soap for family, but only one son’s family wants it. With jobs and kids in the house, they need easy to care for clothing, so hand washable hand knit woolens aren’t favored. I have tried online shops and don’t sell much if anything there either. Maybe I should just make enough soap for the two families, spin and knit what I will wear and not worry about selling any of it.
Can you tell, I am discouraged, but still hopeful?
Cabin Crafted 