Yesterday when my friend was using my Kromski Prelude, I noticed the wheel was wobbling a bit and as I watched, I realized that the drive wheel supports were both a tad loose. I have two Allen wrench sets in my tool box, one metric, one American standard. Since the Kromski is Polish made, I brought in the metric set, which is missing the 3 mm size. I feared that the Allen head screws were 3 mm, but got lucky, they were 4 mm. Now the set is missing two sizes because I put the 4 mm one in my wheel repair kit. Hopefully if I need it elsewhere, I will remember where it is. The design of the wheel makes it very difficult to get to those two screws and I feared I was going to have to remove two legs to tighten them. That would have been a hassle as the treadle and its connected footman are attached to one of the legs. With some difficulty and the short end of the Allen wrench, I managed to get them tight and the wobble is gone.
As I was so enamored with my new spindle, I continued working with it last night until the entire fiber sample was spun. Then I hand wound it off the spindle into a tiny center pull ball and plyed it on itself. It was such a tiny amount, that it produced only 24 yards of light fingering weight yarn.
With the 73 yards spun on the Jenkins Turk recently, if I can find a good coordinating fiber to spin, I will use those two as garter ridges in a hat.
Tonight, I am spinning on the wheel, some Coopworth and Alpaca roving, and on the new spindle, I have some silver Shetland. I want to finish the fiber on the wheel, there is very little left, but the bobbin is getting full, so I may be playing chicken with the bobbin. When I leave for my fiber retreat weekend next Thursday, I want to leave with empty bobbins and some fun fibers to spin. I have one colorful BFL braid, two others at least 4 ounces and a 2 ounce due in the mail, hopefully to arrive before I leave.
I also need to make some lip balm that has been requested by friends prior to my leaving. Hopefully, the bobbins will be emptied, the lip balm made and I will concentrate on knitting the Close to You mini shawl and the strandwork hat both on the needles and spin on the spindles until I leave.
I knit because I make yarn, but given the opportunity to just sell the yarn I make, I would just spin.
Today, a friend that I started on spinning about a year ago came over with a bag of gorgeous Leicester Longwool lamb roving, and an entire Leicester Longwool lamb fleece in the raw. After she started spinning with a drop spindle I gave her, then a Turkish spindle I sold her, she bought several more spindles on her own, and then the travel wheel that I had tried her on. I had gotten a small Saxony wheel made by Kromski and previously owned by a good friend who passed away. The little Saxony is one I can take to retreats and to costumed demonstrations and the travel wheel was not being used. She has become quite a good spinner, but is having some difficulty with the travel wheel due to it’s size. She came over to discuss how to clean raw wool, to try my Kromski to see if it might be a wheel for her to seek out, and a lesson in using wool combs. We had a very nice afternoon playing with fiber and broadening her scope a bit.
After she left, I anxiously dashed up to the mailbox as I was awaiting my newest spinning treasure, a Golding spindle that with it’s dark wood and black ring will be one I can take to demonstrations. Each Golding comes with a small sample of wool usually from Inglenook Fibers. I had just ordered some fiber from them and looked at the colorway that was sent as a sample. If I had just waited a few days, I not only would have bought that colorway, but would have gotten a discount from them. Maybe if I sell another pair of fingerless mitts or a hat, I will return to their online shop and purchase more of it.
This spindle spins forever. I love my little Jenkins Turkish spindle, it is fun to use and to ply from but very limited in amount it will hold, but the Goldings are primo.
Our weekend started with a luxury dinner out for our Valentine Anniversary. There are few nice restaurants in our nearest big town. There are more in the nearest city, about an hour away, but this was the first February 14 that we have spent at home that it hasn’t snowed, so we don’t make reservations that far from home. Last year, we went to the same restaurant and having been there several times before we expected a good dinner and left very disappointed. They post their menu a few weeks prior and we gave them another chance. The starter, salad, and dessert are set, but they had a choice of three entrees, beef, salmon, and pasta, each well presented. Hubby got the beef, I got the pasta and we were both pleased.
Yesterday was a quiet day, not much accomplished but some knitting and spinning, some laundry. The coop needed cleaning as did the house. There was no straw or woodchips to use in the coop, we needed dog food, chicken food, and bird seed but didn’t want to go out yesterday.
After a lunch out today, a trip to Tractor Supply took care of all those needs and the coop was cleaned, sprayed down inside and refilled with fresh pine chips. Tractor Supply had 6 pounds of Black Oil Sunflower seed for $7, but 40 pounds for $10. Not sure how I would deal with 40 pounds, the bargain was too great. Every extra bucket is filled, along with the bird seed container and the bag still is about 1/3 full. The house was vacuumed, dusted, and the kitchen cleaned. Between jobs and preparing dinner, the fiber that was being spun on the spindle was finished and a few rows knit on the scarf.
Left is the fat little cop of singles, Merino, bamboo, and silk from Inglenook Fibers; Close to You being knit from Lollipop Yarn, and the fat little cop of the plied yarn. Looks like I’m stuck in a color warp.
The warm winter and lengthening days have upped egg production from 1 to 3 a day, now getting 4 to 6 a day and the yolks are taking on a nice healthy golden orange. This is the first winter wince I’ve been raising hens that there have been any winter eggs.
While the yarn dries, and some parchment colored Coopworth is being spun, I hope worsted weight this time, I needed a pocket project for today. While looking through my remnants of yarn, I found another small skein of the merlot colored Coopworth that I used for the last mitts, and a partially used skein of the same yarn. A project was started. The Owl hat required Aran weight yarn, the two skeins, held together produced about Aran weight, so I cast on for the hat yesterday afternoon instead of warping the loom.
I got about halfway through the owl last night and finished the owl and started on the decreases while in the PT waiting room today. First they were 30 minutes late taking him in, plus the 30ish minutes he was in the back. The owl will stand out more when the white buttons for the eyes are added.
This gave me the idea that maybe instead of random hats, I could do ones with cats, frogs, alpacas, and owls on them. Since hats and mitts are going to be the primary knit items in the shop and for the fall and winter markets, they might sell better than plain or striped ones.
Larger wraps, cowls, and scarves will be woven.
It seems that more and more people are doing soap and other body products at events, so other than my B&B contract, I may just return to making soap for family and friends that have a particular one they like or limiting myself to just a few favorites for the markets.
Today is a glorious break in a gray and wet week. We have had snow flurries, freezing rain, and drizzle this past week and two weeks of similar weather in the forecast. It has been calm wind wise until today, with warmer temperatures and sunshine. With the calm we had a fire scare earlier in the week when the farmer not immediately behind us, an area that is still wooded, but just beyond him in an area that has been logged, graded, and planted for pasture lit off first one, then several more large burn piles creating billowing smoke that looked too close to us that we feared was our nearer neighbor’s woods. We contacted him and after sending him photos, he left work to come check and let us know where the fires were and that they were being monitored with a track hoe.
There has been smoke down there for 6 days now from various piles, but at least we know the woods below us aren’t on fire.
Through the gray, drizzle and three waiting rooms days, I have been stitching through several smaller skeins of hand spun yarn that I had, making a hat and three pair of fingerless mitts, and finishing the Tool Box cowl from the mini skeins.
Can you tell I’m a lefty, always wearing the mitt on my right hand to take the photo? The Merlot colored mitts still need to be washed and blocked, they were finished last night. After trying on the cowl that I had made for me, I decided I’m not a cowl person, so I put a price tag on it and put it in the shop with the other items.
While perusing patterns, I found a cute hat with an owl on the front. Since there isn’t much yarn left that isn’t designated for weaving, I returned to spinning some gray/brown Coopworth last night. It would be a perfect color for the hat, but the pattern will require me to do some math as it calls for Aran weight yarn, this is likely to be DK weight when plied.
Since I’m not a Super Bowl watcher, I only know one team that is playing and have no allegiance to them, I think I will warp the loom and start a cowl or scarf with a pattern instead of plain weave and continue spinning the Coopworth so I have a pocket project to work on during waiting room visits this week. Since we try to group our errands and lunch out around hubby’s PT visits, I have a 30-45 minute waiting room session a couple times a week, so I need a new pocket project.
Generally, when I spin and knit, I don’t track my time very carefully, if at all. I know it takes me about an hour to spin an ounce of fingering weight yarn on my wheel. An ounce on drop spindles is much longer.
I am not a speed knitter, but not a slouch either and the size of the yarn and needles affect how much I can get done in an hour.
These factors always stop me cold when I am pricing an item of hand spun, hand knit for my shop. A hat of worsted weight yarn might take me about 4 hours to knit if it is a simple pattern, like this one, a slouch hat of stockinette, garter, and ribbing. The yarn was worsted to aran, about 3 ounces, so a couple of hours of spinning and plying. A total of 6 or 7 hours of my time plus the cost of the wool to spin.
This cowl took me close to 24 hours to knit. The three skeins that were hand spun in the cowl were done on drop spindles. The fiber and the mill spun mini skeins were all gifts or bonuses that came with other purchases, so it was just time involved.
Total hours on this fingering weight cowl, maybe 35. I doubt that this cowl will go in the shop, but there is one in the shop of silk, drop spindle spun, my own pattern design. Paying myself slave labor wages of a couple of dollars an hour, it would have to be priced at more than $70-75. People will look, comment that it is lovely, that they can’t spend that much money on a gift or on themselves, and walk on, at least in the area that we live.
The shawl in the header photo is the one I did from the Shave ‘Em to Save ‘Em challenge yarns. It has 8 different breeds hand spun on the wheel. Each breed had to be at least 4 ounces, but the white center triangle was 15 ounces and the light gray around the edge and one stripe was 8 ounces. That was countless hours of spinning and then probably near 50-60 hours to knit it. It isn’t for sale, it couldn’t be. How could I ever price it?
This is my conundrum. My hook is that my items are hand spun, hand knit, or hand woven garments, so I don’t want to work with inexpensive big box store yarn. My body products are handmade with organic ingredients. Because the body products are generally priced under $10, they sell at craft shows and holiday markets but spinning, knitting, and weaving are what I do for pleasure.
So how do you decide what you are worth? Or how much loss you are willing to take to continue the crafts? And none of this takes into account what the equipment costs are to do these crafts.
Whew, we went from 12 degrees f a few mornings ago to 40 and torrential rain. It was low teens 3 nights in a row (no frozen pipes thank goodness) and the days weren’t even reaching freezing then it changed as Virginia will at any season. There was a winter storm warning last night causing schools to delay or close for no reason as it never was cold, and it rained. The wind blew and it rained some more. Still is raining hard. Without an attic to buffer sound, we hear it when it rains hard. Not the pinging on a metal roof like in the barn, but it is still a metal roof with insulation.
When we went to dinner and then to daughter’s house for grandson’s birthday dinner on Sunday, we discussed having another mother/daughter movie date, taking her kids this time, to see Call of the Wild when it comes out the end of February. We had both watched the trailers and wanted to see it. It has been many decades since I had read it, and in our home library is a leather bound copy of Jack London books, so as soon as I finished the ebook I had out from the library, I started reading it. I’m not sure how true to the book the movie will be, but I am looking forward to it.
Today’s rain allowed me to finish it.
The Toolbox Cowl is progressing. I sat in a waiting room again yesterday and knit. Work has been done on it at night. I’m on the last stockinette section, the second to last skein. There will be one more Diamond tweed section with this skein and the final skein and the last Garter Rib section. I’m not sure I should have used the more brightly colored variegated one, but I think I like it anyway.
With lots of Corriedale, Merino, silk, and bamboo in the skeins, it is soft. It shouldn’t take me too much more time to complete. I read the Yarn Harlot’s blog and she posts finishing mitten and cowls in a day. Wow, she must be a speed knitter.
Tomorrow is going to be chilly and party sunny, maybe I can finally get the coop cleaned out. Today a bale of pine chips was purchased because straw seems to be scarce. The old straw is going in the run, the rain has made the area just inside the gate a hazard to my health and safety. There really isn’t a level spot on our property, but I’m not sure I picked the right spot to put that coop when we got it. With the bare scratched earth and a couple inches of rain or a coat of ice, I can slide forever. Perhaps I should put some rough pavers from the gate to the pop door.
A few days ago, I asked, “Where is Winter?” Well it found us. When we left for grandson’s birthday dinner last night, there were snow flurries. This morning, there was a dusting on all surfaces and a morning temperature of 16f. The high staying in the 20s. Now, I know that isn’t cold in parts of the world, but it is pretty danged cold here. Tonight is a repeat, then we return to more normal 30s and low 40s daytime, 20s to low 30s nightime. I expected to get zero eggs today with it so cold, but the girls surprised me with 4. I have gone out several times today to check so they wouldn’t freeze in the nesting box. The water in the coop was frozen this morning and will be again tomorrow.
This would have been a good day to stay in, but we had yet another appointment to keep this morning and it required a driver for the passenger, so both of us were out in the bitter breeze.
Yesterday afternoon, I finished knitting the carry along hat I cast on a couple days ago. The pattern is Barley Hat by Tin Can Knits, the yarn is my hand spun Tunis dyed red, plied with a Jacob X Finn. I spun this skein as an early wheel project, so it has been sitting in my stash for quite a while and it has never sold. It was a good weight for a hat and enough to make a large slouchy version. It is damp and blocked in the photo.
Knowing there would be waiting room time today, a project that has been in my queue for some time is Tool Box Cowl by Adventure DuJour Designs to use up several collected mini skeins, some of which I spun on the drop spindle. After I finished the hat, I cast on for it and got the garter rib section done and realized that I didn’t have the right needle size for the rest. My interchangeables only go down to a size 3, I have a size 2 fixed circular needle, but it is 16″ long and the cowl has 168 stitches, so too many for such a short needle. While at daughter’s house for cake after the birthday dinner, I borrowed a 24″ and continued on with the Diamond Tweed pattern on the correct size needle. I have finished the first two colors of 6 and am about to work the next Diamond Tweed section that uses color 2 and 3. Color 3 is the blue and teal mini skein in the lower right of the photo.
Color 1 is hand spun Coopworth, Color 2 is a wool/bamboo/silk blend I spun on a drop spindle, Color 3 is a mill spun mini skein that was dyed by a friend that has passed away. Colors 4 and 5 are his yarns also, and Color 5 will be another drop spindle spun mini skein of Merino/Silk/Sari Silk. Each skein has some blue in it.
Yesterday we picked up Saturday’s mail and in it was the yarn I had ordered as the warp for a scarf or cowl. It is Shetland lamb and baby Alpaca that will be used with my spun Romeldale CVM.
The grayer brown is my hand spun. I had hoped that the book I had ordered with rigid heddle information and patterns would beat the yarn here, but the book is still not in. I would have had it sent to the house, but the book seller said it would come in in 2 or 3 days. The book seller I spoke with today said I should never have been told that, that it usually takes about a week and with their membership, which we have, it could have been shipped directly to me with no shipping charges and likely would have arrived sooner. Oh well! It will come in when it comes and I will plan out the use of the yarns above.
The hat will definitely go in my shop. The cowl is probably mine. The undecided cowl/scarf/small wrap with the yarn above will likely go in the shop, brown is not my color against my face. I guess my inventory is being rebuilt for the online shop and next fall and winter’s markets.
After the holiday markets and many months of knitting up my hand spun yarn, my yarn stock was low. When spinning in Colonial costume, I generally spin washed Jacob fleece, spinning from locks, combing or carding it to spin, but not using processed batts, top, or roving. I took advantage of lower stock and less stress to get things made to clean up my fiber area, see post https://cabincrafted.fangorn.space/?p=415 , but didn’t return to spinning then as I had been given a rigid heddle loom for Christmas and the announcement of the imminent birth of our 8th grandchild. I immediately bought cotton yarn and wove a baby blanket for him as I knew I couldn’t get a blanket knit fast enough. He was born on January 5th, the same day I mailed the blanket and it arrived the day he came home.
I had begun knitting fingerless mitts for myself as every pair I knit ended up being sold except one pair that were too small for me. Hats and fingerless mitts make good carry along projects and I worked on them in waiting rooms whilst hubby was having some medical imaging testing done on several days. They were finished, but wanting them to be long enough to be warm, I had made them too long to be functional, so I set them aside for a few days and returned to my spinning. I had bought 4 ounces of Romeldale CVM roving from a friend, a second 4 ounces, the first having been turned into yarn for the mitts that didn’t fit and the too long ones, and I returned to finish spinning it. While that skein was being washed, I looked to see what else I had besides the Jacob. In my stash of fiber was some roving that I could identify as Coopworth from another friend and spun it. With woven cowls and scarves in mind.
Two days ago, I ripped back the mitts to a more appropriate length, picked up the stitches and knit on new ribbing to make them useful, just in time for this weekend’s winter weather advisory. Then needing a carry with me project, I pulled a skein of yarn that I spun several years ago that has never sold and started a hat.
And I went to my newly organized stash to pull out more fiber to spin. This is where the disorganized part comes in. The fiber is all neatly bagged in bins, but I failed to put any identifying information in the bags, so other than a braid I got at the spinner’s Christmas party and the Jacob that I washed and bagged, I have almost no idea what I have.
There is still a little of the merino that a friend and I sent for processing, and a small ball of Cormo that was gifted to me, but there are bags that I can’t identify.
I am spinning the gray brown and I think, maybe, it is Coopworth from a friend. The creamy gray is a mystery. It feels like it might have alpaca in it, but I have no idea when I purchased it or from where. I don’t think I will dig deeper into the bins until I finish these two, knowing that there is a pound of fiber on it’s way to me in the mail. I think I will label them. I guess that is a good idea, my memory just isn’t serving me well today.
So far this is proving to be a mild winter, gray and drizzly. It suggests that stink bugs, ticks, and fleas will be prevalent this summer. It is so mild, that the weeds that are usually beat back in the vegetable garden in winter are not only growing, but thriving. Last summer, the garden was a lot of work and I tried to stay on top of the weeding, but was losing the battle with some of them. I never beat the mint bed and the Creeping Charlie is taking over and choking out everything. The garden is also too big for me to keep it all in rotation. I have looked at options for reducing the size, making some of the boxes 4 boards high instead of 2, but the perennials are at the two ends with a 4 X 8 bed of blueberry bushes that finally produced last summer, the 3 barrels that are old and fragile of red raspberries and I fear they would disintegrate if I try to move them and they finally have the raspberries contained at one end. The other end has the asparagus bed that is now 6 or 7 years old and produces more asparagus than daughter, a friend, and I can eat in a season. Those two perennial ends do control the garden size to some extent.
One side of the garden is a pathway away from the chicken pen for about half of the garden length, beyond the chicken pen is one of the worst patches of Creeping Charlie. I have considered pulling down all of the fencing and starting over. If the fencing was hard up against the boxes on the side that the chickens can reach, the length of the garden and if I keep the plantings far enough away from the fence to prevent long necks from reaching through to eat my veggies, perhaps their scratching would keep the weeds down on that side of the garden. The chickens won’t touch the Creeping Charlie to eat, but maybe their scratching for seeds and goodies tossed down there would reduce it. The sides of the garden nearer the house and south of the berries could be reduced and the boards from those boxes used to make the rear boxes taller so they are easier for me to work. The issue there is the post that has the solar charger on it is on that edge, though the charger is dead. Maybe it could be moved with the fence or just be removed entirely. If moved, I could hang a gate on it.
In April, the university has a service day that you can sign up for help. Maybe some help getting the fencing in order for the garden and chicken pen would be incentive to keep at it.
Today’s forecast looks like maybe the thunderstorms from a few days ago are going to be followed as the adage says with some snow to start the weekend. More likely it will be a sloppy mix of snow, freezing rain, and rain with little or no accumulation.
The hens must think it is spring. This week I have had a day with 3 eggs, one with 4, and yesterday I got 5. There probably won’t be any today, but that is okay. This is the first winter I have gotten any from my hens.
The warm weather has had me reluctant to use one of my Christmas gifts, a cast iron bread pan, but this bread is an easy loaf that can be made in just a couple of hours with no kneading, so we had a hot loaf of Herb and Onion bread for dinner one evening.
The drizzle outside, the doctor’s appointments, and now a pair of head colds between us have keep me indoors and instead of warping the loom, I finished spinning 4 ounces of Romeldale CVM that I got from my friend Gail (Sunrise Valley Farm) and got a generous 289.5 yards of light fingering yarn from it. It is now washed and awaiting the arrival of a purchase of mill spun alpaca, silk, wool blend yarn from another friend. The mill spun will be the warp for a scarf or wrap and the CVM the weft. I also spun 3 ounces of Coopworth from another friend, Debbie (Hearts of the Meadow Farm) and got 112.5 yards of worsted weight from it. I have ordered another 8 ounces of Coopworth that may be from the same lot, or will at least coordinate with it and it will become another scarf or wrap. I am going to try to spin some of it tight enough and fine enough to be the warp.
Today after a frustrating attempt to order a rigid heddle book online using a gift card, we went to Barnes and Noble and ordered it there. I hope to learn some new techniques and patterns to work into my weaving. With the 8 ounces of Coopworth to match the maroon above, I ordered another 8 ounces of this
It doesn’t really have a plan, but I have a 4.8 oz braid of BFL and Tussah Silk that might go well with it. I’ll have to wait to see how they spin before I decide.
Cabin Crafted 